Oil leak from injector line OM366
Moderator: MAN 16.242
Forum rules
### This section is a NO FLAMING ZONE! That means you cannot reply "harshly", abusively, sarcastically or in any negative manner to members. ###
### This section is a NO FLAMING ZONE! That means you cannot reply "harshly", abusively, sarcastically or in any negative manner to members. ###
-
- Posts: 0
- Joined: Sat Feb 05, 2022 10:56 am
Oil leak from injector line OM366
Anyone able to help with leaking oil from fuel injector line connections where they pass through the side of the cylinder head on an OM366 mercedes engine. Grommets around injector lines ive removed are not split, so must have been assembled before the ferrules were crimped on each end of the injector lines. Hoping there may be an aftermarket split grommet available somewhere.
- Guy_Arab
- Posts: 855
- Joined: Sat Mar 06, 2004 10:11 pm
- Favourite Vehicle: M.A.N Bus & Guy Arab
- Location: Perth W.A.
Re: Oil leak from injector line OM366
I CHECK THE MANUAL FOR YOU
GUY ARAB
GUY ARAB
-
- Posts: 0
- Joined: Sat Feb 05, 2022 10:56 am
Re: Oil leak from injector line OM366
Thanks Guy. I ended up making some packing shims out of washers, which have allowed me to put more crush on the grommets. Seems to be working for now. Have you had to deal with the bushes and seals on the gear selector shaft that runs from one end of the bus to the other in 1 length. They must have bolted it in and put the bus shell over the top. Im chasing the bushes and nylon bellows for same. Not sure how i will instal them though