mercedes benz 305 bus park brake

General Transport Discussion not specific to one state
Post Reply
wombatwomper
Posts: 4
Joined: Thu Jul 02, 2015 8:40 am

mercedes benz 305 bus park brake

Post by wombatwomper »

Hi everyone thanks for having a look at our problem we have a 1979 ex sydney council bus which we love and want to get it moving to a site where it can be worked on, it runs well and is only just out of rego the problem is the park brake is stuck on due to a safety mechanism. Our good friend who has a lot of experience as a mechanic is working on it and we are currently mapping the air system and working where the air is going and not going. We have a couple of things to ask one is does any one know of a way to bypass some of the system to get air to the park brakes and the bus seems to take a bit of time to get air everywhere and a red light stays on on the dash for the air does anyone know if this warning light is connected to the park brake staying on. Thank you for helping and have a great day Stu :D
User avatar
Guy_Arab
Posts: 764
Joined: Sat Mar 06, 2004 10:11 pm
Favourite Vehicle: M.A.N Bus & Guy Arab
Location: Perth W.A.

Re: mercedes benz 305 bus park brake

Post by Guy_Arab »

perhaps your program is the four way valve Most needs changing
Guy Arab
User avatar
DiAmOnD T
Posts: 976
Joined: Thu Oct 07, 2004 2:11 pm
Favourite Vehicle: AEC Mandator Ex Browns no7
Location: under the subway at 'the main

Re: mercedes benz 305 bus park brake

Post by DiAmOnD T »

There is an emergency air fill located at the front of the bus, look under the bumper roughly inline with the left hand wiper arm, but as Guy_Arab mentioned, if your 4 way valve is jammed it wont pass any air through the system to the brakes.
There are a couple of pressure switches which control the lights on the dash, it could be a wire off or simply the lack of air keeping the light on
The Diesel Guy
- Mobile heavy vehicle repairs serving Sydney to Newcastle -

dieselguynsw@gmail.com
Post Reply

Return to “General Transport Discussion”