• Advertisement

[OMSI 2] MAN-SL202 PMC W.I.P.

Discuss Transport Simulator games in this section

Moderator: busrider

[OMSI 2] MAN-SL202 PMC W.I.P.

Postby DavidH21 » Tue Jul 09, 2013 12:01 pm

REFERENCE PHOTOS & DATA NEEDED FOR VARIOUS SECTIONS

Hello guys, today I present my latest project for OMSI 2 (Which should be released sometime this month-September?).
It is based on the MAN SL202 units from Sydney Buses and I'm trying to keep it as realistic as possible.

Image
The front-left side (I need reference photos for the top edges)

Image
The rear-right side (The lights at the top will be fixed)

Image
The rear-left side

Image
The front-right side

List of areas where data or photos are needed;
1.Hubcaps (Front and Rear)
2.Actual tires (R22.5 size?)
3.The vent at the left rear (No idea what it does or what it looks like in 3D)
4.The exhaust stack
5.Emergency exit hatches
6.Dashboard
7.Drivers cab
8.Seats

To-be-FAQ:

1. When will this be released as a finished product?
Sometime in the 2nd quarter of 2014, in both LHD and RHD versions.

2.Will this be freeware or payware?
This depends on who/how I get the sounds and textures from.

Any comments or constructive criticism :)
Last edited by DavidH21 on Tue Jul 09, 2013 4:04 pm, edited 1 time in total.
DavidH21
 
Posts: 31
Joined: Sun Oct 14, 2012 3:17 pm
Location: Western Sydney, Somewhere on Earth
Has thanked: 2 times
Been thanked: 3 times
Favourite Vehicle: Transit Systems MAN 18.320

Re: [OMSI 2] MAN-SL202 PMC W.I.P.

Postby GeelongBuses » Tue Jul 09, 2013 1:17 pm

This bus almost looks like Benders #22! :lol: :lol:

Cheers, Ben
Subscribe to my youtube channel!
http://www.youtube.com/channel/UCZBTOrRG2LiE_MUeRy54fbQ
GTZ I make Transport Videos and Gaming!
User avatar
GeelongBuses
 
Posts: 178
Joined: Mon Jul 30, 2012 5:29 pm
Location: Lara, VIC With lot's of noise!
Has thanked: 2 times
Been thanked: 5 times
Favourite Vehicle: Into mostly of Mercs and Volvo

Re: [OMSI 2] MAN-SL202 PMC W.I.P.

Postby DavidH21 » Tue Jul 09, 2013 4:58 pm

GeelongBuses wrote:This bus almost looks like Benders #22! :lol: :lol:

Cheers, Ben


Well they're both bodyworks designed with VÖV standards in mind :lol:

On a different note, what route do you think will best pair with a MAN SL202 or a Mercedes 0405 (PMC of course) to represent Sydney at its best :? ?
Since Ryde's 0405s are well out of the feral-zone in the west and Willoughby doesn't even have any SL202s left, I'm stuck for ideas...
DavidH21
 
Posts: 31
Joined: Sun Oct 14, 2012 3:17 pm
Location: Western Sydney, Somewhere on Earth
Has thanked: 2 times
Been thanked: 3 times
Favourite Vehicle: Transit Systems MAN 18.320

Re: [OMSI 2] MAN-SL202 PMC W.I.P.

Postby Mitch » Thu Jul 11, 2013 12:50 am

DavidH21 wrote:On a different note, what route do you think will best pair with a MAN SL202 or a Mercedes 0405 (PMC of course) to represent Sydney at its best?


Probably a dumb question, but did the SL202s or the O405's operate along 380? What about a route that crosses the Harbour Bridge? Seeing as Bondi and the Harbour Bridge are two of Sydney's biggest tourist destinations, I feel like they could be represented in OMSI format. If you were building a map to go along your SL202/O405 models, you could build your map to what it looked like in the years where the SL202s and O405s dominated the streets. I'd enjoy something like that.

Thanks,
Mitchul [;
User avatar
Mitch
 
Posts: 1910
Joined: Sun Nov 09, 2008 7:32 pm
Location: Geelong
Has thanked: 81 times
Been thanked: 102 times
Favourite Vehicle: VH-VUB

Re: [OMSI 2] MAN-SL202 PMC W.I.P.

Postby Cowra » Thu Jul 11, 2013 5:47 pm

DavidH21 wrote:
GeelongBuses wrote:This bus almost looks like Benders #22! :lol: :lol:

Cheers, Ben


Well they're both bodyworks designed with VÖV standards in mind :lol:

On a different note, what route do you think will best pair with a MAN SL202 or a Mercedes 0405 (PMC of course) to represent Sydney at its best :? ?
Since Ryde's 0405s are well out of the feral-zone in the west and Willoughby doesn't even have any SL202s left, I'm stuck for ideas...

Route 200, Chatswood - Bondi Junction? Both Waverley MkVs and Willoughby MAN SL202s served on it in the past, and it crosses the Bridge. You could even use a bit of artistic licence and extend it to Nth Bondi / Bondi Beach..?
Ringer of bus bells and tram gongs.
User avatar
Cowra
 
Posts: 522
Joined: Wed Jan 16, 2008 4:54 pm
Location: The Red Lines
Has thanked: 24 times
Been thanked: 64 times
Favourite Vehicle: Old ones.

Re: [OMSI 2] MAN-SL202 PMC W.I.P.

Postby DavidH21 » Wed Jul 31, 2013 9:26 pm

If anybody feels that this topic is just taking up bandwidth and being utterly useless and un-updated, look here http://aussiex.org/forum/index.php?/top ... -sl202-pmc.

The Aussiex post is always updated and features many more content than on show here :D .

Best Regards,
David.
DavidH21
 
Posts: 31
Joined: Sun Oct 14, 2012 3:17 pm
Location: Western Sydney, Somewhere on Earth
Has thanked: 2 times
Been thanked: 3 times
Favourite Vehicle: Transit Systems MAN 18.320

Re: [OMSI 2] MAN-SL202 PMC W.I.P.

Postby BAMBAM » Mon May 12, 2014 9:41 am

Are you still making this bus, suddenly your thread in the link no longer accessible?
BAMBAM
 
Posts: 531
Joined: Fri Jan 14, 2011 10:37 am
Has thanked: 1 time
Been thanked: 50 times

Re: [OMSI 2] MAN-SL202 PMC W.I.P.

Postby PoweredByCNG » Wed May 21, 2014 12:26 am

Both MkVs and SL 202s operated on the Alisson Road services that run between the city and Coogee, for example. That would be a lovely route to recreate as Randwick depot is only a block from Alisson Road itself.
Proud owner of ex-Transperth 1042, ex-Transperth 1114 and ex-STA Adelaide 1549.
User avatar
PoweredByCNG
 
Posts: 3455
Joined: Fri Mar 05, 2004 10:26 pm
Location: WA
Has thanked: 73 times
Been thanked: 255 times
Favourite Vehicle: Mercedes-Benz O 405



  • Advertisement

Return to Transport Simulators

Who is online

Users browsing this forum: No registered users and 1 guest