New Users (or anyone else) is/are welcome to ask questions in here to which the answers might be obvious to most but you simply don't know yourself or are unsure where to find the answer. You can also ask questions about the working of the forum or anything else you may think of.
Moderator: MAN 16.242
Forum rules
### This section is a NO FLAMING ZONE! That means you cannot reply "harshly", abusively, sarcastically or in any negative manner to members. ###
by Rod B » Mon Dec 04, 2017 1:28 pm
Hi All,
I am trying to establish if the rubber seal used on the side window fixed pane (under the sliding windows) is a one piece seal or is in two pieces, being the top horizontal piece with the second piece doing the sides and the bottom. I am hesitant to pull one out at this stage and am calling on those of you with far greater knowledge than I to afford me some advice. I have attached a photo of the windows in question.
- Attachments
-

- window.PNG (215.06 KiB) Viewed 5151 times
-
Rod B
-
- Posts: 0
- Joined: Thu Oct 05, 2017 7:35 am
- Has thanked: 0 time
- Been thanked: 0 time
by ax8 » Mon Dec 04, 2017 6:40 pm
i've got a custom coaches step deck body with those windows and its a 1 piece rubber seal which goes around the whole window
-

ax8
-
- Posts: 37
- Joined: Thu Apr 05, 2007 12:29 am
- Location: NSW mid north coast
- Has thanked: 0 time
- Been thanked: 15 times
by Rod B » Tue Dec 05, 2017 8:25 am
Thanks ax8, I might go direct to them and ask.
-
Rod B
-
- Posts: 0
- Joined: Thu Oct 05, 2017 7:35 am
- Has thanked: 0 time
- Been thanked: 0 time
by DiAmOnD T » Tue Dec 19, 2017 9:14 pm
For the lower fixed pane section off memory is a single rubber. you need to remove the slider windows then undo the screws that hold the window track in to be able to remove that glass
-

DiAmOnD T
-
- Posts: 976
- Joined: Thu Oct 07, 2004 2:11 pm
- Location: under the subway at 'the main
- Has thanked: 1 time
- Been thanked: 24 times
- Favourite Vehicle: AEC Mandator Ex Browns no7
by Rod B » Tue Jan 02, 2018 1:21 pm
Thanks for all the info. I am still chasing a price on the rubbers.
On another matter but related to the windows, does anyone know of replacement windows that either slide or pushout for increased air flow? I am wanting them to fit the same cut out if possible. I know its a big ask as the existing windows have the angled sides. Its worth an ask to see what people have to say!
-
Rod B
-
- Posts: 0
- Joined: Thu Oct 05, 2017 7:35 am
- Has thanked: 0 time
- Been thanked: 0 time
Return to New Users/Ask a Simple Question
Who is online
Users browsing this forum: No registered users and 2 guests